Example

By amribakri ( , , ) on 9:19 PM

  • How to set up Auto Heal, Auto Pet Feed
    • First, assign your Heal skill(or Pet Feed) into a F-Key slot (in Flyff), let's say F1.
    • You must have notice that there's 8 slot to use. Let's assume that you have inserted the Heal skill (or Pet Feed) into slot key no. 1.
    • Now in BuffPang[H], start with selecting your Flyff Id (start your Flyff or the list will be empty).
    • At Slot Key, select 'Slot 1', under Single Key Group.
    • At F-Key, select 'F1'.
    • At Interval, enter 3,000ms (means 3 seconds interval)
    • Press Add as Single Key Job
    • Finally, press Start All button at top-right of BuffPang.
    • Now check your Flyff char. Your char will use Heal skill(or Pet Feed) every 3sec. Voila..!!
  • How to set up Auto Shout (AFK Shout)
    • Firstly, setting up AFK Shout job is exactly the same as Auto Heal and Auto Pet Feed.
    • The only different is that AFK Shouting requires a text shortcut to be assigned into a F-Key slot (in Flyff), instead of Heal skill or a Pet Feed.
    • To create a shout text shortcut in Flyff, type [/s I'm Shouting...] (without bracket) in your chat box. Don't press Enter.
    • Find the little Chat Cloud Icon at left most side of the input chat box (check below)

    • Drag it into your FKey slot. Add more shout using the same way, but place it it in different Fkey slot.
    • Now you are ready to AFK Shouting. Press Start All
  • How to set up Auto Buffer
    • First, you must assign all your buffs skill into F-Key slot (in Flyff). Let's say F1-Patience, F2-Beef Up, F3-Cats Reflex, F4-Heap Up, F5-Canon, F6-Accuracy, F7-Protect, F8-Spirit Fortune. All of them is using slot key no.2.
    • Now in BuffPang[H], start with selecting your Flyff Id (start your Flyff or the list will be empty).
    • At Slot Key, select 'Slot 2', under Sequential Keys Group.
    • At F-Key, select 'F1'.
    • At Select Job Id, choose 'New Id'.
    • At Interval, enter 300000ms. (means 5mins x 60 = 300sec interval)
    • Press Add as Sequential Key Job. Up to this part, you just finished with inserting your F1-Patience buff.
    • Now, check the entry of Select Job Id. You will notice there is a new entry to this list. Select the new entry. (Should be 'Job 0' if you just jumped to this example, or 'Job 1' if you are following this example from the very beginning. The Id number is incremental)
    • To insert your F2-Beef Up buff, select F-Key to 'F2'. Let the Slot Key remain as it is. Change the value of Job Gap to 2000ms (means 2seconds)
    • Press Add as Sequential Key Job. Up to this part, you just finished with inserting your F2-Beef Up buff.
    • The content of Job Id also change as you pressed 'Add as Sequential Key Job'.
    • Repeat these step, starting with adding the F2-Beef, until all your buffs are in the same Job Id. Check with Job Id content if you are unsure.
    • Finally, press Start All button at top-right of BuffPang.
    • Now check your Flyff char. Your char will start rebuffing itself every 5mins, with 2 seconds delay between buff. Voila..!!
  • How to set up Invoke command for your Auto Buffer Job

    • I assume that your Auto Buffer job is set and working.
    • From Job Manager tab, expand your Auto Buffer's Job Id.
    • Highlight the Configurations node for your Auto Buffer's Job Id.
    • A Edit Job Config panel will become visible on the right side of the job tree.
    • Enable Include in Invoke option.
    • Enter Rebuff as a name for this job.
    • Press Apply. Check with the grey area at topmost of BuffPang[H].
    • A small purple button has appeared in there. It will be labeled with the Job Id of your Auto Buffer. The tooltips will also include the name of your Auto Buffer's job, so make sure to check the tooltips first before pressing any button.
    • Press this button anytime to invoke your Rebuff job. Voila..!!
    • Now you can no longer ignore anyone asking for buffs :p
  • How to set up Auto Unsummon pet (multi summon)
  • [Scenario : Do unsummon for Pet A after 2 hour, then summon Pet B 3 seconds later, and finally unsummon Pet B 2 hour later (4 hour after the job started)] [WARNING : Advance Instructions..!! Do not try this if you have trouble understanding basic examples above.]
    • I assume that you have 1 pet out(summoned) and still alive.
    • Don't forget about to set up Auto Feed job. Set it up first before you can proceed with this example. Use example from above.
    • The trick here is to perform a 3 key spam with 2 hour interval using 2 different Job.First, is to unsummon first pet (Job A), second is to summon the second pet (Job A), and finally to unsummon the second pet (Job B).
    • Assign the summoned pet (Pet A) into your Fkey (in Flyff). Let's say F3, using Slot 1.
    • Also, assign the second pet (Pet B) that you wish to summon later into your FKey (in Flyff). Lets say F4, using Slot 1.
    • Assigning Job A
      • Now in BuffPang[H], start with selecting your Flyff Id (start your Flyff or the list will be empty).
      • Using a Single Key job, add the following as a job using this values : Fkey = F3, Slot = Slot 1, Interval = 7,200,000ms (2 hour x 60 x 60 x 1000 = 2 hour interval)
      • Next, using a Sequential Key job, add the following as a sequential job using this values : Job Id = {the Job Id of Job A from earlier}, Fkey = F4, Slot = Slot 1, Job Gap= 3,000ms (3 seconds interval)
      • Now, under Job Manager tab, choose the assigned Job Id (Job A).
      • Expand the job tree, and select Configurations.
      • A Edit Job Config panel will become visible on the right side of the job tree.
      • Enter 'Pet A' as Job Name.
      • Press Apply
      • Now, select the first job item node.
      • Set Spam Limit to '1'.Press Apply
      • Finally, select the second node and also set spam limit to '1'.
    • Assigning Job B
      • Now in BuffPang[H], start with selecting your Flyff Id (start your Flyff or the list will be empty).
      • Using a Single Key job, add the following as a job using this values : Fkey = F4, Slot = Slot 1, Interval = 14,400,000ms (4 hour x 60 x 60 x 1000 = 4 hour interval)
      • Now, under Job Manager tab, choose the newly assigned Job Id (Job B).
      • Expand the job tree, and select Configurations.
      • A Edit Job Config panel will become visible on the right side of the job tree.
      • Enter 'Pet B' as Job Name.
      • Press Apply
      • Now, select the first job item node.
      • Set Spam Limit to '1'.Press Apply
    • Finally, click Start All or start each job manually. (try to start Job A first, followed by Job B as fast as possible). Again, don't forget to make a Auto Feed job and make sure its also running.
    • Now check back with your Flyff. Your first pet will be unsummon after 2 hour, summon out your second pet 3 sec after unsummoning the first pet, and 2 hour after the second pet is summoned (or 4 hour after you start the job), it will be unsummoned. Voila...!!

Commented 1 time

Share some of your advance knowledge here by giving an example how to manipulate functions in BuffPang[H]..

Post a Comment

Related Posts with Thumbnails